GreaseBook powers the most profitable, operationally efficient producers in the oil patch today.

Not really. Simply share with us your Excel reports, paper gauge sheets, or the login to your existing legacy production software and we’ll take care of the rest.

Our petroleum engineers turn-key your entire setup, we’ll reach out once we’re done. Bada bing.

You’re right. And, because no one leaves their house without their phone (and because our app works offline), we eliminate any excuse for your pumpers NOT to send you their data. See, we told you this would be easy.

In addition to both Android and Apple smartphones, the Greasebook also works on any tablet, laptop, or desktop.

While Greasebook has been implemented in many of the country’s largest publicly traded production companies operating thousands of wells, Greasebook is focused on serving the small and mid-sized independent US-based oil & gas operators.

Anywhere, anytime, on any device (phone, tablet, desktop or laptop).

The beauty of the app is once your pumpers start submitting their production via the Greasebook – anyone on your team can access production reports, graphs and well files from any device at any time.

It’s sorta like a centralized place from which everyone on your team can work, without all the calls, text messages and emails that would go on otherwise.

All day long.

Absolutely. As your pumpers continue to add tickets, comments, pressures, well tests and any other relevant information, your investors will have guest access to as much (or as little) information as you’d like.

Of course, they’ll only see production info for the wells in which they participate.

Oil & gas companies who run Legacy oil and gas software systems expose themselves to major risks (and minor annoyances…)

The complexity of traditional oil & gas production systems is twofold:

1. Software Problem: Legacy software systems are expensive, outdated, clunky and have extremely complex interfaces. In fact, because of all the support and manual interventions required, continuing to use outdated software can often be more costly than simply upgrading.
2. People Problem: Legacy software systems take an enormous amount of time to familiarize oneself with. And, anytime an employee quits, retires, or is let go the amount of training required for new employees can be significantly higher than for newer, more user-friendly software.

This is a lose/lose. What’s more, given all the set-up fees, training fees, support fees and the like the projected ‘savings’ never materialize and now your forced to contend with fluctuating hydrocarbon prices AND a bloated monthly OPEX.

Talk about getting stuck in the muck!

With Greasebook, office users are 99% proficient with the platform in about 20 minutes.

Within 2 seconds – FROM YOUR SMARTPHONE – you’ll have your answer to any question regarding production, allocations, performance, well history files, commentary, run ticket reconciliation, Custom Reports, State reports, and more – all sliced and diced and customized at the Company, Operator, Battery, Well, State, County, Section, Township, Range, Acquisition, or even Supervisor level…

We’ve been at this for awhile. Greasebook was established in 2012 and now supports more than 400+ oil and gas operators (small ma & pops and publicly traded companies alike) across 20 States and is the fastest growing production software in the patch.

The Greasebook corporate outpost is proudly located in Oklahoma City, Oklahoma 🤠📍

The Greasebook helpdesk is staffed by Petroleum Engineers, Geologists, and Completions Experts Monday through Friday, 8AM to 5PM CST. 

We have a real-time chat through which most questions are answered in 2 minutes or less.

Naturally, some questions are more complex and you’ll want to speak to someone over the phone. In this case, we aim to complete all callbacks within two hours of scheduling.👌

Of course, your Dashboard and Reports are available to you 24/7.

We don’t blame them.

Pumpers have been burned by Legacy Production Systems in the past. 😵

However, given how much upside you stand to gain in the form of time savings and profit, DO NOT make the mistake of letting the tail wag the dog, folks!! 💸

Real talk: the average pumper takes about 8 minutes to learn Greasebook (and that goes for guys in their 80s still tending wells…)

Give us two days and we’ll make believers out of your entire pumping crew….

Still not convinced? Check out Greasebook’s “Pumper Wall of Love” by clicking here and let the pumpers tell you themselves 😘

Let us help you help yourself. Simply send us your existing production info, and we’ll assign a production engineer to turn-key your entire setup for you.

We’ll build your wells, your tank straps, your users and anything else you require.

Finally, once everything has been reviewed by your team, we’ll roll out your pumpers and either train them for you or with you while you focus on more important stuff.

That’s not a question, but actually no.

The average pumper demands anywhere from $125 to $400 per month.

And depending on what you require, Greasebook is priced anywhere from $5-15 well/mo.

So, given how much more you’ll get out of your pumpers, how much we’ll streamline your operations, and how quickly we’ll get this all done for you, we’re actually kind of a bargain.

Our guarantee is two-pronged…

First, run the app for full 6 weeks in your operations. If you’re not completely satisfied, let us know and we’ll DOUBLE your money back.

Second, if for any reason you’d like your money back in first 30 days after paying simply let us know and it’s yours. 🤝

However, if you’re anything like our other 400+ operators you’ll be wondering why you didn’t do this 6 months ago…

We’re ready when you are. Take the quiz and schedule a call here – depending how many operators we have in front of you, there’s a chance we can get you up and running by the end of next week.